Our Archives

Call 08068929770 or 08122972656 for any enquiries.

Project Topic:

CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT

Project Information:

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 25 ::   Attributes: DOCUMENTATION ::   2,828 people found this useful

Project Body:

ABSTRACT

 

 

 

          This project is concern about the construction of an electrical stove with three oven apartment is described in his project.  It was carried out in order to solve the problem often encounter in cooking and drying and at the same time finding an alternat6ive means to replace the use of  kerosine and gas for cooking and drying which are often not available due to scarcity of these products, however, the project students have employed the use of electricity which is rending available.

 

          The analysis of each stage of development of this equipment is cleearly described.  Having compared the results of this construction with those exsisting or parallel ones, it was found out that it stands the test of time.

 

          However, the operation of this electrical equipment in not without limitation.  For precisely nine years now Nigeria has been facing power instability, and a seizure of electrical power does disrupt the operation of this equipment, for without which no source of its energy.

 

          The cost analysis also prove to a large extent to be relatively cheaper than most modern cookers and ovens for domestic application.

 

 

 

 

 

APPROVAL PAGE

 

 

 

          This project is approved and submitted to the Department of Mechanical Engineering, Institute of Management and Technology (I.M.T) Enugu, in partial fulfillment of the requirement for the award of I.M.T National Diploma in Mechanical Technology.

 

Head of Department                                   Supervisor

 

                                                                             -------------------

                                                                             External Examiner

 

                                                                             Date:----------------

 

 

 

 

 

 

TABLE OF CONTENT

 

Title page

Table of content

Certification

Dedication

Acknowledgement

Abstract

Approval

 

CHAPTER ONE

 

  1. Introduction/literature Review1.1   Introduction
    1. Problem statement
    2. Purpose of objective of this study
    3. Literature reviewCHAPTER TWO 

 

  1. Constructional specification of the oven2.1   Determination of the insulted portion
    1. Materials used and their importance
    2. Mill steel
    3. Copper element
    4. Insulting materials
    5. SiliconCHAPTER THREE

 

  1. Mechanical construction
  2. The main frame
  3. The top and sides covers
  4. Back cover
  5. The top/heating chamber
  6. Stand/handle
  7. The framing of the door
  8. Mode of operationCHAPTER FOUR

 

  1. Conclusion4.1      How to operate4.2         Inspection and testing

 

  1. The visual inspection
  2. Cold test
  3. Insulation Resistance test
  4. The hot test
  5. Problems encountered
  6. Recommendations
  7. Cost analysis
  1. References

 

 

 

 

 

 

 

 

 

CHAPTER ONE

 

 

 

  1. INTRODUCTION/LITERATURE REVIEW1.1   INTRODUCTION  This project is as a result of increasing interest.

 

Essentially, the idea, as demonstrated in an existing design, arises in the project students a feeling of motivation, and hence the search for a way to bring it to reality in a simple, yet intelligent design, like this.

 

 

  1. PROBLEM STATEMENT

          Specifically, this design seeks for a source of energy that is relatively cheap and available, and therefore has an edge over other stoves and ovens using kerosine and gas as sources of energy.  It also aims at making domestic cookers and ovens safe enough as against highly flammable liquid or gas fuel.

          Many Nigerians today are faced with the problem of petroleum fuel scarcity and as per cooking and drying which is not often easy to get fire wood from forests that are often far away especially from the big cities.  Equally too, the few available fuels are of substandard quality with the attendant danger of fire outbreak.

 

          In addition above, fuel consuming cookers and ovens have two outstanding deficiencies, namely; sooty pre-heating and problem of dogged nozzles which lead to offensive discouraging and dirty burning.

 

          Above all, deforestation as a result of fire wood consumption is causing great deal of environmental problems in most regions of Africa.  In this modern world and its various invented means of cooking, it largely seems as if non has quite addressed this area by providing an alternative means of cooking and drying.

 

          In a close observation, large scale cooking and drying as an drying of meat and fish sellers, commercial corn roasters, food sellers and “suya” sellers, etc, need efficient heating system.  The absence of short drying period and hygienic process of preserving our loide and sea foods is another issue, which has led to fast spoiling and give an electrical stove with an oven apartment to sufficiently address these problems.

 

 

 

 

 

  1. PURPOSE OR OBJECTIVE OF THIS STUDY

          This study is to devise a means of producing an electrical stove with three apartment to address the following:

  1. The problem of sooty pare-heating as observed in vaporizing cookers.
  1.  Economically, this equipment is designed for cost reduction and easy to maintain.(2) To reduce the effect of kerosine scarcity prevailing in our present days.
  1. To meet up with inadequate availability of fire wood through deforestat6ion.
    1. LITERATURE REVIEW

          In an extremely large span of time ago, people generally roasted by placing food substances on hot wood coal or on heated rocks, and smoking (drying) ,of meat and fish was done by means of brick oven.  This brick oven was locally made in a dome shape having an opening through which the firewood and other food substances were put.  In use, the firewood was burnt to a sufficient time to provide enough hot coal before the meat or the fish already laid on a perforated sheet or wire was regulated by either gathering the fire wood together for more heat or withdrawing them from the oven so as to reduce the heat.  This event can be dated back at least to the third century AD

Equally too, primitive Africans set fire on a carefully arranged fire wood and used the fire so generated for cooking.  That was when civilization was still in the womb of time.  As a result of science and technology electricity came into during such trend that electrical element was made to generate heat when electric current is passed through it.  About 1914 electricity was adopted for cooking, and become popular in late 1920s.  along side those periods, oil exploration and its various refined products like kerosine, gas, etc for both industrial and domestic consumption were made possible.  Hence, kerosine stores and gas cookers, over the years, began to replace the primitive way of using firewood for cooking and drying, particularly in most civilized regions of Africa.

 

          Then came a time, late part of the last century and the new millennium, when petroleum fuel scarcity overwhelmed the entire nation, making lives of many Nigerians difficult.  Consequently, kerosine stoves and gas cookers became n o more alternative as before.  Many Nigerians began  using fire wood for cooking and drying.  This period was crucial during the PENGASAM strike, 1994. When a certain container inside which coal is burnt to provide heat for cooking and roasting was named

 

ABACHA STGOVE:  In the course of the above periods, foreign electrical stoves and ovens flooded our local market, and their maintenance culture were by no means easy.  Thus, economically their uses were not feasible enough domestically.

 

          Thus threw a challenge to our local engineers to produce electrical stoves and ovens that can stand the test of time within our locality, and to avoid the danger of kerosine and gas explosion which have terminated a lot of lives in our present days.  Such a challenge also paved way for the project students came up with such a dual-purpose domestic electrical heating equipment to sufficiently address the problems being imposed by petroleum fuel consuming stoves and ovens, incessant as stated preciously in 1.2. above.


Get The Complete Project »

Project Department:

MORE MECHANICAL ENGINEERING FREE UNDERGRADUATE PROJECT TOPICS AND RESEARCH MATERIALS

Instantly Share this Project On Social Media:

CLOSELY RELATED MECHANICAL ENGINEERING FREE UNDERGRADUATE PROJECT TOPICS AND RESEARCH MATERIALS

DESIGN A ND FABRICATION OF A DUST EXTRACTOR

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 25 ::   Attributes: DOCUMENTATION  ::   3939 engagements

ABSTRACT Man’s imp act on global environment system especially in the area of dust extraction is now at a scale where it is disrupting. These dust extractors varies in major ways. The enviro...Continue reading »

DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 30 ::   Attributes: DOCUMENTATION  ::   2542 engagements

ABSTRACT The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint. The pr...Continue reading »

CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 40 ::   Attributes: DOCUMENTATION  ::   3423 engagements

ABSTRACT This write up focuses attention on a detailed report and account on the process of construction and formulation of plan for the actual and physical realization of the construction of the p...Continue reading »

THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 40 ::   Attributes: DOCUMENTATION  ::   3420 engagements

ABSTRACT Mechanical engineering department of the named institute has many non operational machines sequel to this fact maintenance which resulted to non development and non maintenance of the ins...Continue reading »

REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 20 ::   Attributes: DOCUMENTATION  ::   2446 engagements

ABSTRACT Mechanical Engineering Department of the Institute of Management and Technology has many non – functional machines. This is caused as a result of poor maintenance culture, which in tu...Continue reading »

What are you looking for today?

TESTIMONIALS:

  • 1. Ibrahim Salama from Kaduna said "Thanks You So Much Sir We Appreciate ".
    Rating: Excellent
  • 2. Ibrahim Salama from Kaduna said "Thanks You So Much Sir We Appreciate ".
    Rating: Excellent
  • 3. Mohammed A.B from Veterinary Laboratory, Zanzibar ,Tanzania said "You are doing good job to assists in research. God bless you.".
    Rating: Very Good
  • 4. Grace Madu from IMT enugu said "Thank you so much; i will tell my friends about you guys!!! Please give them a good job just like mine!!! God bless you!!!".
    Rating: Excellent
  • 5. Favour Adeoti from Unimaid said "For the good deeds and help to students like me, may God almighty continue to bless u and empower you to do more. Thank u very much...".
    Rating: Excellent
  • 6. Saddiq Abubakar Shuaibu from ESAE BENIN UNIVERSITY said "I check your site because I want you to help do this project thank you".
    Rating: Excellent

Paper Information

Format:MS WORD
Chapter:1-5
Pages:25
Attribute:DOCUMENTATION
Price:₦3,000
Get The Complete Project »

Best Selling Projects

Our Archives