Our Archives

Call 08068929770 or 08122972656 for any enquiries.

Project Topic:

DESIGN AND CONSTRUCTION OF AUTOMATIC PUMPING MACHINE FOR WATER SUPPLY

Project Information:

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 37 ::   Attributes: EXPERIMENT ::   2,595 people found this useful

Project Body:

CHAPTER ONE

 

INTRODUCTION

Water is an indispensable and inevitable substance to all living things due to its usability and high priority among other substance and materials. Provision of large volume of waters essential due to its significant purpose, which therefore called for a means by which sufficient, and good quality water can be obtained. There are different types of water namely; well water, pipe-borne waters, rain water, stream water, river water e.t.c.

            In the earlier days, the use of buckets and calabash is employed in fetching water for homes, agricultural and domestic’s uses. Later, hand pumps were developed to reduce the stress and the inconveniences and other forms of contamination’s which arise due to direct contact of the body to the available water for consumption. Besides, only a small quantity of water can be made available due to physical factors such as tiredness, distance and climatic factors like dry season.

            Hence, to eliminate these difficulties, pumping machines is employed to perform the job of fetching water and storing it in storage tanks for future purpose. The system consists of connecting pipes, water pump, which is connected to electric power supply and operated manually. In order to fully eliminate the stated problems and future needs for large volume of water, the concept of automatic pumping machine is developed.

            This project emphasizes on the construction of automatic pumping machine which in turns provide a simple logical, versatile and economical/circuit which turns on the pump when water in the tank fall below the minimum level and also off process is achieved by the incorporating of the following to the pumping system:

The sensor: This measures the physical states such as the level of the water.

The responder: which responses to what is being sensed, it comprises of electrical and mechanical devices.

The actuator: This actuates the responder to sense the water level in the tank to perform the switching operation.

In summary, the automatic control system is very effective, efficient and consequently reduces labour cost, flooding, man power and provides enough water for usage.

Background of the study.

This project is carried out so as to provide a means of reducing stress involved in fetching water, wastage of water and flooding which may result from overfilling of the tank and eventually reduce to minimum, if not eliminating damages to the pumping machine.

Aim and Objectives

The aims and objectives of this project are:

  1. To reduce the labour involved in operating pumping machine manually.
  2. To prevent or protect the coil of pumping machine from being burnt as a result of continuous work beyond its operating time.
  3. To pump water automatically from water sources.
  4. To prevent wastage of natural resources (water in particularly) and flooding of premises.
  5. To prevent the machine from sucking mud and or air when there is no water in the well or source of water supply.

Scope of the Study

The project is design to provide a means of storing water for the benefit of mankind and industrial purpose. The control section is used for the control of water level to various sizes of tank or reservoir. The minimum and maximum level of water in the tank is determined by the probe.

Significance of Study

The significance of the study is to design a means of mankind water available in the storage tank for future uses such as domestic, industrial, Agricultural and economic purposes, which are beneficial to mankind. It is also reduce labour coil, wastage of water resulting from filling of the tank, which can eventually leads to flooding. Consequently it enables long life span of the pumping machine.

Methodology

In the course of searching for information on this project, we consulted some learned professionals, lecturers, relevant textbooks, such as electrical drafting and design for the HND students, journals and past project reports in the library of the institution e.g Federal Polytechnic, Ede, Osun State, and browsing on the Internet to acquire relevant information on the design and construction of the project.

Limitation of the Project

The major limitation of the study is that it cannot be used when there is no power supply from Power Holding Company of Nigeria (PHCN) unless an alternative means of power supply is designed to power the project.


Get The Complete Project »

Project Department:

MORE ELECTRICAL ELECTRONICS ENGINEERING FREE UNDERGRADUATE PROJECT TOPICS AND RESEARCH MATERIALS

Instantly Share this Project On Social Media:

CLOSELY RELATED ELECTRICAL ELECTRONICS ENGINEERING FREE UNDERGRADUATE PROJECT TOPICS AND RESEARCH MATERIALS

SOLAR POWER INVERTERS, ANALYSIS AND TEST EVALUATION

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 100 ::   Attributes: EXPERIMENT  ::   8693 engagements

INTRODUCTION The quest to satisfy our need for stable power supply in Nigeria has driven most Nigerians into an ardent search for alternative renewable power sources. One of such major renewable power...Continue reading »

DESIGN AND CONSTRUCTION OF MICROCONTROLLER TIMER SOCKET OUTLET

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 71 ::   Attributes: EXPERIMENT  ::   2962 engagements

CHAPTER ONE INTRODUCTION BACKGROUND INFORMATION As the world becomes concerned with conserving electric power and the fuels that generate electricity, there is a growing need for the conscientio...Continue reading »

DESIGN AND CONSTRUCTION OF A SOLAR POWERED MULTIPLE CELL PHONES CHARGING BOOTH

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 56 ::   Attributes: EXPERIMENT  ::   3187 engagements

ABSTRACT Cell phones need electric sources to charge their batteries in order to work, but there are people in developing and third world countries that find it hard to access electric sources.In an ...Continue reading »

IMPROVING THE CAPACITY OF A RENEWABLE POWER SYSTEM, USING SOLAR POWER PANEL (A CASE STUDY OF COMPUTER SCIENCE ND SOFTTWARE LAB)

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 70 ::   Attributes: EXPERIMENT  ::   2454 engagements

CHAPTER ONE INTRODUCTION 1.1 BACKGROUND TO THE STUDY The use of renewable energy increased greatly just after the first big oil crisis in the late seventies. At that time, economic issues were the...Continue reading »

INVESTIGATION OF THE PERFORMANCE INDEX OF 3.5KVA/48V POWER INVERTER

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 75 ::   Attributes: EXPERIMENT  ::   6110 engagements

ABSTRACT The initial cost of the power inverter system is significant higher compared to the conventional source of power. As a result, there is need for the performance evaluation of various power i...Continue reading »

DESIGN OF A FULL ADDER CIRCUIT

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 35 ::   Attributes: EXPERIMENT  ::   2890 engagements

CHAPTER TWO 2.0 LITERATURE REVIEW According to the novel by Mehdi Ghasemi, Mohammad Hussein Moaiyeri, Keivan Navi, published on Jan 10, 2012. Due to high power consumption and difficulties with...Continue reading »

What are you looking for today?

TESTIMONIALS:

  • 1. Mohammed A.B from Veterinary Laboratory, Zanzibar ,Tanzania said "You are doing good job to assists in research. God bless you.".
    Rating: Very Good
  • 2. Grace Madu from IMT enugu said "Thank you so much; i will tell my friends about you guys!!! Please give them a good job just like mine!!! God bless you!!!".
    Rating: Excellent
  • 3. Favour Adeoti from Unimaid said "For the good deeds and help to students like me, may God almighty continue to bless u and empower you to do more. Thank u very much...".
    Rating: Excellent
  • 4. Saddiq Abubakar Shuaibu from ESAE BENIN UNIVERSITY said "I check your site because I want you to help do this project thank you".
    Rating: Excellent
  • 5. Temitope Olumide from UAM makurdi said "I can not believe i could trust online platforms but you prove to me that there are still some good people out there. Thank you Mr Donald".
    Rating: Excellent
  • 6. Topeola Atinuke from the bells said "hmmmm, not sure yet about all dis comment still working on dem yet....tank u".
    Rating: Average

Paper Information

Format:MS WORD
Chapter:1-5
Pages:37
Attribute:EXPERIMENT
Price:₦3,000
Get The Complete Project »

Best Selling Projects

Our Archives