Our Archives

Call 09159097300, or 09067754232 for any enquiries.

Project Topic:

DESIGN AND IMPLEMENTATION OF A SOFTWARE FOR THE COMPUTATION OF STUDENTS CGPA

Project Information:

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 60 ::   Attributes: source code ::   3,530 people found this useful

Project Body:

ABSTRACT

 

 

          This project is solely based on the critical appraisal of the use of computer in result processing. The work has done with the aim of studying all the processes involved in manual processing of students result with a view of developing software that can aid in doing the job whenever the new system is introduced to the relevant department (Computer Science Department). In the course of achieving these objective relevant literatures were reviewed on the subject matter.

Based on the review, various staff under Computer Science Department of Institute of Management and Technology Enugu were marked and used for the purpose of collecting the needed data for the research work.

The methods used during the finding were oral, interviews, observation, document review. It was also done randomly. Based on the data collected the researcher find out that there was much problem encountered using manual result processing, which has been taken care of by the developed software.

 

TABLE OF CONTENTS

 

Title Page

Certification page

Dedication

Acknowledgements

Abstract

Table of contents

 

CHAPTER ONE

1.0     Introduction

1.1     Statement of the problem

1.2     Purpose of the study

1.3     Aims and Objectives

1.4     Scope of study

  1. Limitation

 

CHAPTER TWO

2.0Review of Related Literature

 

 

 

CHAPTER THREE

3.0     Description and Analysis of the existing system

3.1     Facts finding methods used

3.2     Organizational chart 

3.3     Objectives of the existing system

3.4     Input, process and output analysis

3.4.1  Input analysis

3.4.2  Process analysis

3.4.3  Output analysis 

3.5     Information flowchart/ Diagram

3.6     Problems of the existing system

  1. Justification for the new system

 

 

CHAPTER FOUR

4.0     Output specification and design

4.1     Output specification

4.2     Input specification and design

4.3     File design

  1. Procedure chart

4.5     System flowchart

  1. System requirement

 

CHAPTER FIVE

5.0     Implementation

5.1     Program design

5.2     Program flowchart

5.3     Pseudocodes

5.2     Source program

  1. Test Run

 

CHAPTER SIX

  1. Documentation

 

CHAPTER SEVEN

  1. Recommendation and Conclusion

7.1     Recommendation

  1. Conclusion

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CHAPTER ONE

 

1.0     INTRODUCTION

          Information technology is able to facilitate the revolution of changes, which optimize performance and profitability to institutions, organization and companies because it provides solution to one of the key business barrier that is distance, time and difficulties associated with crossing them or sharing them. Emergency of electronic processing of data and it’s computer technologies has led to the death of bugs, errors and time wasting during processing and computation of student’s result.

          Electronics data processing introduced towards the end of 1934’s has brought fundamental dangers in the way, so many things art done, including the topic of this project and so many other things like product advertising, information sharing, on-line computation, electronic data storage, electronic mail exchange, to list but a few.

          The computer science department in institute of Management and Technology Enugu is responsible for the processing various departments during examination, right from the inception of this great institution; result processing has been manually processed.  The manual system employed is not very efficient, in that a lot of paper work has to be done which takes a reasonable length of time to prepare. Due to the increasing number of students in computer science department (IMT) Enugu, that has written the examination in the school, results computation of the student’s CGPA has been a very difficult task.

Therefore, because of this problems and errors arising from such a system, a software-computerized result processing system becomes inevitable; the benefits accruable from the computer-based system cannot be over emphasized.

 

1.1     STATEMENT OF PROBLEMS

          Historically, result computation and students data record management in computer science department in the Institute of management and technology Enugu has been affected by several factors based on the current manual processing method used such as:

-        Loss of vital information relating to student result/ records

-        The time and labour involved in the student result computation of CGPA

          -        Files and records not properly kept.

-        Miscalculation of students CGPA after graduation.

-        Difficulties involved in searching for a specified record

-        Wrong transcription and mutilations by accident or on purpose

-        Information is very insure and can be accessed by the wrong persons.

-        Insecurity of the result, which can be modified by unauthorized person/or access.

-        Use of filing cabinets makes retrieval of information very difficult.

  • Difficult of data sharing i.e. from HOD’s offices to exams and records.

 

1.2     PURPOSE OF STUDY

          Electronics data processing environment where information is processed using computers system hooked on to a Network is more advantageous. Owing to this, therefore, the purpose of this study is directed towards developing a powerful computer application program that will collapse the short-comings encountered in the student’s result processing and data management in the great department of computer science in the institute of management and technology (IMT) Enugu.

 

1.3     AIMS AND OBJECTIVES

          The main objective of this project is to provide a faster means of reducing some (or all) the problem encountered during result computation and registration of student such as:

          -        Errors due to over sight

          -        Redundancies in record keeping

          -        Errors in computation

          -        Difficulties in sharing

          -        Money time for duplication

  • Delay in computation

 

 

1.4     SCOPE OF STUDY

          For the fact that we are awaking from one deplorable indifference to the studies and teaching or studying of computer as a course, it’s proficiency in developed countries like USA, Japan, England e.t.c. Therefore, this can be limited only on the grade point average generation and the storage of students record in the computer science department within I.M.T Enugu.

 

1.5     LIMITATION

          Some constraints like the project duration, geographical location and nature of where the institution is located, economical instability, lack of material and poor information facilities posed a hindrance and will not permit analysis and performance of more research on the problem situation.


Get The Complete Project »

Project Department:

MORE COMPUTER SCIENCE FREE UNDERGRADUATE PROJECT TOPICS AND RESEARCH MATERIALS

Instantly Share this Project On Social Media:

CLOSELY RELATED COMPUTER SCIENCE FREE UNDERGRADUATE PROJECT TOPICS AND RESEARCH MATERIALS

A SURVEY OF DATA BASE MANAGEMENT IN ENHANCING THE WORK PERFORMANCE OF OTM GRADUATES IN SELECTED ORGANISATIONS IN ABUJA

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 61 ::   Attributes: Questionnaire, Data Analysis,Abstract  ::   8780 engagements

CHAPTER ONE 1.1. BACKGROUND OF THE STUDY A database is an organized collection of data.[1] It is the collection of schemes, tables, queries, reports, views and other objects. The data is typically o...Continue reading »

A STUDY INTO THE CHALLENGES AND PROSPECTS OF MARKETING NIGERIAN MADE COMPUTER SOFTWARES

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 65 ::   Attributes: Questionnaire, Data Analysis,Abstract  ::   11331 engagements

CHAPTER ONE 1.1. Background to the Study Made-in-Nigeria softwares are those that are produced within Nigeria. Nigeria as a third world country needs to produce its own software so that it will help...Continue reading »

AN APPRAISAL OF THE ROLE OF ICT AS A CHANGE AGENT FOR QUALITY EDUCATION IN TERTIARY INSTITUTION IN NIGERIA

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 64 ::   Attributes: Questionnaire, Data Analysis,Abstract

CHAPTER ONE INTRODUCTION 1.1. BACKGROUND OF THE STUDY Quality assurance in the education system is a concept consisting of lot of activities that are designed to improve the quality of input, proce...Continue reading »

ASSESSMENT OF THE UTILIZATION OF INTERNET SERVICES AMONG STUDENTS IN FEDERAL INSTITUTIONS IN KADUNA STATE

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 69 ::   Attributes: Questionnaire, Data Analysis,Abstract  ::   8769 engagements

CHAPTER ONE INTRODUCTION The convergence of information and communication technologies as typified by the Internet is increasingly having more influence on all aspects of the society as it has becom...Continue reading »

AUTOMATED DATA ANALYSIS OF LABORATORY TEST RESULTS AND ITS SCIENTIFIC IMPORTANCE

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 59 ::   Attributes: Sort code, Abstract  ::   6793 engagements

CHAPTER ONE 1.1. Introduction As an authentic measure to curb mortality rate, it is important to know the diseases that contribute to increasing mortality rate. Laboratory test results provide inform...Continue reading »

AUTOMATED MARKET BASKET ANALYSIS SYSTEM

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 65 ::   Attributes: Sort code, Abstract  ::   7188 engagements

CHAPTER ONE 1.0 INTRODUCTION Data mining is described as the extraction of hidden helpful information from a collection of huge databases, data mining is also a technique that encompasses an enormou...Continue reading »

What are you looking for today?

TESTIMONIALS:

  • 1. Jayone from FPA said " I had a wonderful experience using UniProjectMaterials,though they did not deliver the material on time, but the content had good quality. I recommend UniProjectMaterials for any project research work.".
    Rating: Very Good
  • 2. Mugisha R from B.U, UGANDA said "Wow, this is great, your materials has helped me alot. Many blessings. I will inform my friends. Thanks. ".
    Rating: Very Good
  • 3. Nwachukwu Ruth Chinyerr from Michael okpara university of Agriculture,umudike said "I really appreciate this. Materials like this are good guides to writing a researchable project.".
    Rating: Good
  • 4. Ibrahim Salama from Kaduna said "Thanks You So Much Sir We Appreciate ".
    Rating: Excellent
  • 5. Ibrahim Salama from Kaduna said "Thanks You So Much Sir We Appreciate ".
    Rating: Excellent
  • 6. Mohammed A.B from Veterinary Laboratory, Zanzibar ,Tanzania said "You are doing good job to assists in research. God bless you.".
    Rating: Very Good

Paper Information

Format:ms word
Chapter:1-5
Pages:60
Attribute:source code
Price:₦3,000
Get The Complete Project »

Best Selling Projects

Our Archives