Our Archives

Call 09159097300, or 09067754232 for any enquiries.

Project Topic:

THE EFFECT OF TAXATION ON MANUFACTURING FIRMS (A CASE STUDY OF IKEJI PLASTIC COMPANY LIMITED ONITSHA)

Project Information:

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 55 ::   Attributes: Data Analysis, abstract ::   2,637 people found this useful

Project Body:

ABSTRACT

From original conception, taxation may be regarded as an assessment imposed by the government to meet the express of government structures.

The aim of this research is to find out how taxation effect, the manufacturing firms with reference to Ikeji plastic company limited Onitsha. The research seeks to find out if these effect are positively oriented or negatively oriented.

The study is carried out as step towards giving answer to these problems. In attempt to solve the research questions, questionnaires were used to guide the study the collected data and stated questions were later analyzed and tested using arithmetic percentages. The influences and deducation drawn from these analyzes and tested reveals certain facts.

It was discovered that the effect of taxation on the manufacturing firms was both positive and negative. In as much as those interviewed held the view that the tax their company pay is too much, they also agree the they enjoy some benefit from paying such taxes.

From the findings, the researcher therefore recommends that government should find a way of checking and balancing tax payment so as not to discourage tax payment on the part of the payers. 

TABLE OF CONTENT

CHAPTER ONE

Introduction

1.1              Statement of problem and purpose of the study

1.2              Rational of the study

1.3              Significance of the study

1.4              Background of the study

1.5              Definition of terms

CHAPTER TWO

Review of related literature

2.1              What is tax

2.2              Origin of taxation

2.3              Legal development of income tax of companies (source)

2.4              Forms of taxes

2.5              Objective of taxation

2.6              Principles of taxation (source)

2.7              The problems of manufacturing firms in Nigeria (sources)

CHAPTER THREE

3.1              Hypothesis

3.2              Sources of data

3.3              Location of data

3.4              Method of data collection

3.5              Method of data analysis

3.6              Limitation of the study

CHAPTER FOUR

Data presentation, data analysis and discussion of results

4.1              Data presentation

4.2              Data analysis

4.3              Discussion of result

CHAPTER FIVE

Summary, conclusion and recommendation

5.1              Summary

5.2              Conclusion

5.3              Recommendation

Areas of further research

Bibliography

CHAPTER ONE

INTRODUCTION

1.1              STATEMENT OF THE PROBLEMS AND PURPOSE OF THE STUDY

It is really a statement of fact that a manufacturing industries fail to reach their objective as a result of their inability to meet up with their tax payment.

            The study was set up to find the problems that tax have created on manufacturing industries. The researcher also intends to find out the effects of tax on manufacturing companies especially on profit.

The effects of tax on the firms line of business. The study aims at helping manufacturing industries to realize how important taxation is the purpose of the study is to investigate among other things the followings;

 

v  The effect of indirect tax on manufacturing industries in their ability to procure equipments and also raw materials.

v  The effort government has done to ensure maximum efficiency in production and no dissatisfaction on the part of the manufacturing industries with respect to taxes.

1.2              RATIONAL OF THE STUDY

The rational of the study is, to identify and explain how effort government has done to ensure maximum efficiency to words in production and no dissatisfaction on the part of the manufacturing industries with respect to tax.

            Every government with good intention normally focus on hoe to carry out an effective fiscal policy, that is a process to check public expenditure and shaping of the tax system in order to centre upon.

v  Maintenance of a growing high employment in the case of the manufacturing sector, the nature of the effect of the taxation policy will depend on the objective the government hopes to achieve. It might be on the manufacturing industries advantage or not. An example is where the government design to protect infant industries by granting tax holidays to them.

1.3              SIGNIFICANCE OF THE STUDY

The significance of this study “the effect of taxation on manufacturing firms” a case study of Ikeji pastic company LTD is that it helps to educate manufacturing firms on the importance of taxation with regards to the growth of the economy as it effects the manufacturing firms.

            It will also highlights on the performance of manufacturing industries on the result they create in the economy. The study will also stress a way to make the manufacturing industries take appropriate steps to improve their business and creating satisfaction at the same time.

            The study will also be of help or importance to the following peoples.

v  The business community for the purpose of the companies’ income taxes.

v  Local and small manufacturing industries

v  The government and those responsible for fiscal policies.

v  Student and other researchers who wish to expand this study.

1.4              BACKGROUND OF THE STUDY

For many years even before the colonial era, taxation has been in existence in Nigeria. the local communities then usually tax themselves to promote some of their community project and defense against any attack. It has been a general belief that civilized economic have been able to develop because of taxation.

Taxation is one of the fiscal policies instrument. Here in Nigeria, we have all withnessed different administration and government, the fiscal policy seems to always change, thereby causing flotation in the system.

Taxation is generally seen as a compulsory levy by government through its agencies generate, income, consumption and capital of its subjects.

These levies are made up of personal income, company’s profit and os on. It can be noted that taxation is very vital for the economic development of a country. Its fluctuation will thereby cause an effect (whether favourable or unfavourable) in economy.

Every government with good intentions normally focus an hoe to carry out an effective fiscal policies, that is a process to check public expenditure and shaping of the tax system in order to centre upon.

v  Maintenance of a growing high employment

v  Increase in business cycle

v  Reduction of inflation

v  Avoidance of excess demand.

Any taxation policy that hopes to achieve these above named objectives usually have a general effect in the economy i.e. manufacturing and the consuming sector. Taxes are classified in to two categories: direct and indirect taxes.

Direct taxes: this is tax levied directly on individual and companies. Direct tax is made up of personal income tax, company tax and capital gain tax.

Indirect taxes: this is a tax on goods and services example are import and export duties, excise duties.

1.5              DEFINITION OF TERMS

Infant industry: a newly established industry

Tax system: this is a way which government collects tax and utilization of the tax

Taxation: the compulsory contribution to the support of the government levied on persons, income, property, commodity transaction etc. at fixed rates, mostly proportional to the amount on which the contribution is levied.

Manufacturing firms: an independent  administered unit of the manufacturing industry


Get The Complete Project »

Project Department:

MORE BANKING AND FINANCE FREE UNDERGRADUATE PROJECT TOPICS AND RESEARCH MATERIALS

Instantly Share this Project On Social Media:

CLOSELY RELATED BANKING AND FINANCE FREE UNDERGRADUATE PROJECT TOPICS AND RESEARCH MATERIALS

A CRITICAL ANALYSIS ON THE USE OF FINANCIAL STATEMENTS IN ASSESSING THE PERFORMANCE OF AN ORGANIZATION (A CASE STUDY OF FIRST BANK NIGERIA)

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 72 ::   Attributes: Questionnaire, Data Analysis  ::   6712 engagements

ABSTRACT This project work is carried out to examine the contribution of micro finance banks to the development of Small and medium scale enterprises in Nigeria. The Brass micro finance bank is used a...Continue reading »

A STUDY ON THE ACCEPTANCE AND ADOPTION OF THE CBN CASHLES POLICY IN PORT HARCOURT, NIGERIA

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 76 ::   Attributes: Questionnaire, Data Analysis,Abstract  ::   5118 engagements

CHAPTER ONE INTRODUCTION 1.1. BACKGROUND TO THE STUDY One of the prerequisites for the development of national economy according to Ajayi et al, 2006 is by encouraging a payment system that is secu...Continue reading »

A STUDY ON THE IMPACT OF BUDGETARY CONTROLS ON THE PERFORMANCE OF AN ORGANIZATION (A CASE STUDY OF FIDELITY BANK PLC)

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 80 ::   Attributes: Questionnaire, Data Analysis,Abstract  ::   5475 engagements

CHAPTER ONE INTRODUCTION 1.1. BACKGROUND OF THE STUDY AND PROFILE OF THE ORGANIZATION Following the uncertainties prevailing in the Nigerian business environment today, managers and stakeholders mu...Continue reading »

ANALYZING PERFORMANCE APPRAISAL TECHNIQUES IN UNION BANK NIG PLC

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 67 ::   Attributes: Questionnaire, Data Analysis,Abstract  ::   14524 engagements

CHAPTER ONE INTRODUCTION 1.1. BACKGROUND OF THE STUDY In any evaluation of the condition necessary for the growth and survival of an organization, the role of performance appraisal is a strategic f...Continue reading »

AUDIT INDEPENDENCE: ENHANCING ACCOUNTABILITY AND TRANSPARENCY IN CORPORATE ORGANIZATIONS

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 71 ::   Attributes: Questionnaire, Data Analysis,Abstract  ::   4654 engagements

CHAPTER ONE INTRODUCTION 1.1. Background of the study The subject of transparency and accountability in modern day corporate organizations has continued to receive attention as never before. It has b...Continue reading »

CREDIT MANAGEMENT AND ISSUES OF BAD DEBTS IN COMMERCIAL BANKS IN NIGERIA

 Format: MS WORD ::   Chapters: 1-5 ::   Pages: 68 ::   Attributes: Questionnaire, Data Analysis,Abstract

The article on this topic (credit management and issues of bad debts in commercial banks in Nigeria) is an extract from literature review of the project material. The complete project work would be ma...Continue reading »

What are you looking for today?

TESTIMONIALS:

  • 1. Jayone from FPA said " I had a wonderful experience using UniProjectMaterials,though they did not deliver the material on time, but the content had good quality. I recommend UniProjectMaterials for any project research work.".
    Rating: Very Good
  • 2. Mugisha R from B.U, UGANDA said "Wow, this is great, your materials has helped me alot. Many blessings. I will inform my friends. Thanks. ".
    Rating: Very Good
  • 3. Nwachukwu Ruth Chinyerr from Michael okpara university of Agriculture,umudike said "I really appreciate this. Materials like this are good guides to writing a researchable project.".
    Rating: Good
  • 4. Ibrahim Salama from Kaduna said "Thanks You So Much Sir We Appreciate ".
    Rating: Excellent
  • 5. Ibrahim Salama from Kaduna said "Thanks You So Much Sir We Appreciate ".
    Rating: Excellent
  • 6. Mohammed A.B from Veterinary Laboratory, Zanzibar ,Tanzania said "You are doing good job to assists in research. God bless you.".
    Rating: Very Good

Paper Information

Format:ms word
Chapter:1-5
Pages:55
Attribute: Data Analysis, abstract
Price:₦3,000
Get The Complete Project »

Best Selling Projects

Our Archives